PAROC Head Pin

PAROC Head Pin is designed for capacitor discharge welding devices for welding directly through the insulation.

The PAROC Head Pin fasteners allow the fixing in a single operation of non-aluminum faced insulation such as slabs or wired mats on metal surfaces (ventilation ducts, metal beams, metal industrial, ventilation or air condition equipment, etc.).

Datasheet

Updated 9 Nov 2017

Packaging

Package Type
Delivered in plastic buckets: 1000 (standard), 2000 or 3000 pcs (option).

More Information

Material: Cup: galvanized. Pin: standard – coppered (galvanized, stainless steel).

Other Properties

Other Properties
PropertyValue
Cup diameter30 mm
Pin diameter2,2 / 2,7 mm
Length (Cup + Pin)19-250 mm
MaterialSt37 / 1.4301
OverlayCu / Zn

Installation

Depending on the final effect you may use two different length of the pins:; 1. Quilted surface - for the products up to 50 kg/m3 use the pins with the length little bit smaller than nominal insulation thickness (example: for insulation thickness 30mm use 28,5 mm pin).; 2. Flat surface – for all densities use the pins with the length little bit higher than nominal insulation thickness (example: for insulation thickness 30mm use 30,5 mm pin).

Packaging

Package Type
Delivered in plastic buckets: 1000 (standard), 2000 or 3000 pcs (option).

More Information

Material: Cup: galvanized. Pin: standard – coppered (galvanized, stainless steel).

Other Properties

Other Properties
PropertyValue
Cup diameter30 mm
Pin diameter2,2 / 2,7 mm
Length (Cup + Pin)19-250 mm
MaterialSt37 / 1.4301
OverlayCu / Zn

Installation

Depending on the final effect you may use two different length of the pins:; 1. Quilted surface - for the products up to 50 kg/m3 use the pins with the length little bit smaller than nominal insulation thickness (example: for insulation thickness 30mm use 28,5 mm pin).; 2. Flat surface – for all densities use the pins with the length little bit higher than nominal insulation thickness (example: for insulation thickness 30mm use 30,5 mm pin).

Packaging

Package Type
Delivered in plastic buckets: 1000 (standard), 2000 or 3000 pcs (option).

More Information

Material: Cup: galvanized. Pin: standard – coppered (galvanized, stainless steel).

Other Properties

Other Properties
PropertyValue
Cup diameter30 mm
Pin diameter2,2 / 2,7 mm
Length (Cup + Pin)19-250 mm
MaterialSt37 / 1.4301
OverlayCu / Zn

Installation

Depending on the final effect you may use two different length of the pins:; 1. Quilted surface - for the products up to 50 kg/m3 use the pins with the length little bit smaller than nominal insulation thickness (example: for insulation thickness 30mm use 28,5 mm pin).; 2. Flat surface – for all densities use the pins with the length little bit higher than nominal insulation thickness (example: for insulation thickness 30mm use 30,5 mm pin).