PAROC Pro Bend 100

PAROC Pro Bend 100
PAROC Pro Bend 100 is a ready cut part for small pipe elbows made of non-combustible stone wool pipe section. Factory produced bends are a very good and fast insulation solution for pipe elbows.

Datasheet

Updated 17 Oct 2017

Certification Number
0809-CPR-1016 / VTT Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-CL10

Type-Examination (Module B) certificate No. VTT-C-12177-15-17

Nominal Density
100 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
30 - 100 mm15 - 168Depending on pipe diameter
In accordance with EN 13467In accordance with EN 13467 
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009 +A1:2013 (EN 14707)

Packaging

Package Type
Cartons on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1L EN 14303:2009 (EN 13501-1)

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000.064 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000.092 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Chloride content not declared for products produced in Hällekis.

Certification Number
0809-CPR-1016 / VTT Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-CL10

Type-Examination (Module B) certificate No. VTT-C-12177-15-17

Nominal Density
100 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
30 - 100 mm15 - 168Depending on pipe diameter
In accordance with EN 13467In accordance with EN 13467 
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009 +A1:2013 (EN 14707)

Packaging

Package Type
Cartons on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1L EN 14303:2009 (EN 13501-1)

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000.064 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000.092 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Chloride content not declared for products produced in Hällekis.

Certification Number
0809-CPR-1016 / VTT Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-CL10

Type-Examination (Module B) certificate No. VTT-C-12177-15-17

Nominal Density
100 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
30 - 100 mm15 - 168Depending on pipe diameter
In accordance with EN 13467In accordance with EN 13467 
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009 +A1:2013 (EN 14707)

Packaging

Package Type
Cartons on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1L EN 14303:2009 (EN 13501-1)

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000.064 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000.092 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Chloride content not declared for products produced in Hällekis.