For small and medium sized industrial pipe elbows, we recommend you use PAROC Pro Bends designed for pipe elbows of 90 degrees.
Like PAROC Pro Segments for large pipe elbows, PAROC Pro Bends perform just as effectively as PAROC pipe sections for straight pipelines. The installation of pre-fabricated insulation components is more accurate, which in turn leads to optimal final performance.
Watch the PAROC Pro Bend installation video to see how easy insulating small industrial pipe elbows can be.
Paroc recommends PAROC Pro Segments for insulating large pipe elbows. Precisely dimensioned segments provide well fitting seams and do not require any reinforcements. PAROC Pro Segments creates added value compared to on-site wired mat installation.
The need to measure or fabricate external cladding on-site is eliminated. Cladding is easily installed on segments and the end result is of highest quality. See the comparison of heat flows with different insulation solutions on industrial pipes.
Watch the PAROC Pro Segment installation video to see how easy insulating large industrial pipe elbows can be.
The benefits of double layer (DL) insulation and PAROC Pro Lock products can also be utilised in pipe elbows by using PAROC Pro Segment DL solution, in which the seams are sealed in order to minimise heat loss.
Double layer solutions are used for high temperature – for example, on a superheated steam pipelines.
PAROC Pro Segment DL is compatible with both PAROC Pro Lock sections and PAROC Pro Section DL products.
For high temperature pipelines, Paroc recommends double-layer solution.
In big pipe elbows, we recommend you use two bindings per segment.