PAROC Marine LF1 Tape

PAROC Marine LF1 Tape

PAROC LF1 Tape is an reinforced aluminum tape with a grey color lacquer finish and a modified acrylic adhesive with siliconized liner. 

It is ideal for sealing the joints when using PAROC Marine LF1 faced  products such as sections, lamella mats or slabs. The product  for sea going vessels complying with IMO FTP Code (ref. Ch. 5.2.1 and Ch. 8), Annex 1 part 2 and part 5 (IMO Resolution MSC. 307(88) Annex 1 Part 2 and Part 5).PAROC LF1 Tape gives a great finish and safe installation. 

Datasheet

 
Updated 16 Apr 2018

Dimensions

Dimensions
Thickness
0.07
Width
30, 50 and 75 mm
Length
50 m
Volume
Rolls / box: 7 pcs, boxes / pallet: 24 pcs.

Other Properties

Other Properties
PropertyValue
Thickness:0.07 mm
Adhesive:Modified acrylic
Temperature range:-40 °C to +120 °C (160 °C short time)
Release liner:Siliconized paper
Color:aluminum, grey
Installation temperature:+5 °C ÷ +40 °C
Storage conditions+5 °C ÷ +25 °C

Facings

Facing Material
Background: Aluminum foil 0,07mm

Colours

Aluminum, grey

Installation

During the installation, the insulation material to be taped should be at a minimum temperature of +5 Celsius. Allow the temperature of the insulating material to adjust to the ambient installation temperature. Make sure that the surfaces to be joined with tape are clean, dry free of dust and grease.Surface must be free from oil, fat, dust and solvents before film/tape application. Do not use cleaners containing anti-adhesive agents. Some plastics and paints may discharge anti-adhesive agents leading to bonding failure. Rough and uneven surfaces may weaken bonding.

Handling and Storage

Product should be stored in original packaging, laid flat on the slit edge of the roll. Storage in dry and clean areas, at normal temperature, protected from direct sunlight and heat sources.

More Information

We strongly advise users to test the product‘s suitability for their own particular requirement. All data and recommendations contained in this Technical Data Sheet are based on our own test results and practical experience and are aimed at helping customers select the appropriate tape for a given application. This information is provided without liability. We reserve the right to change the technical specification without prior notice.

Dimensions

Dimensions
Thickness
0.07
Width
30, 50 and 75 mm
Length
50 m
Volume
Rolls / box: 7 pcs, boxes / pallet: 24 pcs.

Other Properties

Other Properties
PropertyValue
Thickness:0.07 mm
Adhesive:Modified acrylic
Temperature range:-40 °C to +120 °C (160 °C short time)
Release liner:Siliconized paper
Color:aluminum, grey
Installation temperature:+5 °C ÷ +40 °C
Storage conditions+5 °C ÷ +25 °C

Facings

Facing Material
Background: Aluminum foil 0,07mm

Colours

Aluminum, grey

Installation

During the installation, the insulation material to be taped should be at a minimum temperature of +5 Celsius. Allow the temperature of the insulating material to adjust to the ambient installation temperature. Make sure that the surfaces to be joined with tape are clean, dry free of dust and grease.Surface must be free from oil, fat, dust and solvents before film/tape application. Do not use cleaners containing anti-adhesive agents. Some plastics and paints may discharge anti-adhesive agents leading to bonding failure. Rough and uneven surfaces may weaken bonding.

Handling and Storage

Product should be stored in original packaging, laid flat on the slit edge of the roll. Storage in dry and clean areas, at normal temperature, protected from direct sunlight and heat sources.

More Information

We strongly advise users to test the product‘s suitability for their own particular requirement. All data and recommendations contained in this Technical Data Sheet are based on our own test results and practical experience and are aimed at helping customers select the appropriate tape for a given application. This information is provided without liability. We reserve the right to change the technical specification without prior notice.

Dimensions

Dimensions
Thickness
0.07
Width
30, 50 and 75 mm
Length
50 m
Volume
Rolls / box: 7 pcs, boxes / pallet: 24 pcs.

Other Properties

Other Properties
PropertyValue
Thickness:0.07 mm
Adhesive:Modified acrylic
Temperature range:-40 °C to +120 °C (160 °C short time)
Release liner:Siliconized paper
Color:aluminum, grey
Installation temperature:+5 °C ÷ +40 °C
Storage conditions+5 °C ÷ +25 °C

Facings

Facing Material
Background: Aluminum foil 0,07mm

Colours

Aluminum, grey

Installation

During the installation, the insulation material to be taped should be at a minimum temperature of +5 Celsius. Allow the temperature of the insulating material to adjust to the ambient installation temperature. Make sure that the surfaces to be joined with tape are clean, dry free of dust and grease.Surface must be free from oil, fat, dust and solvents before film/tape application. Do not use cleaners containing anti-adhesive agents. Some plastics and paints may discharge anti-adhesive agents leading to bonding failure. Rough and uneven surfaces may weaken bonding.

Handling and Storage

Product should be stored in original packaging, laid flat on the slit edge of the roll. Storage in dry and clean areas, at normal temperature, protected from direct sunlight and heat sources.

More Information

We strongly advise users to test the product‘s suitability for their own particular requirement. All data and recommendations contained in this Technical Data Sheet are based on our own test results and practical experience and are aimed at helping customers select the appropriate tape for a given application. This information is provided without liability. We reserve the right to change the technical specification without prior notice.