PAROC Hvac Lamella Mat AluCoat

PAROC Hvac Lamella Mat AluCoat

PAROC Hvac Lamella Mat AluCoat is a non-combustible stone wool for thermal and condensation insulation of ventilation ducts and equipment. It has a reinforced aluminium foil facing.

For Marine applications also available with facing G4.

Datasheet

 
Updated 10 Jun 2020

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T4-ST(+)250-WS1-MV2-CL10

Type-Examination (Module B) certificate No. VTT-C-11535-15-16

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
Width 1000 or 500 mm. Lenght 2500 - 10000 mm depending on thickness.20 - 100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability250 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
Fire Classification (IMO)Non-combustible IMO FTP Code Part 1
Surface Flammability (IMO)Low flame-spread characteristics IMO FTP Code Part 2 and 5

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,038 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,047 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,059 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,074 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,091 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,110 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT4 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T4-ST(+)250-WS1-MV2-CL10

Type-Examination (Module B) certificate No. VTT-C-11535-15-16

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
Width 1000 or 500 mm. Lenght 2500 - 10000 mm depending on thickness.20 - 100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability250 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
Fire Classification (IMO)Non-combustible IMO FTP Code Part 1
Surface Flammability (IMO)Low flame-spread characteristics IMO FTP Code Part 2 and 5

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,038 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,047 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,059 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,074 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,091 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,110 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT4 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T4-ST(+)250-WS1-MV2-CL10

Type-Examination (Module B) certificate No. VTT-C-11535-15-16

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
Width 1000 or 500 mm. Lenght 2500 - 10000 mm depending on thickness.20 - 100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability250 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
Fire Classification (IMO)Non-combustible IMO FTP Code Part 1
Surface Flammability (IMO)Low flame-spread characteristics IMO FTP Code Part 2 and 5

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,038 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,047 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,059 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,074 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,091 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,110 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT4 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013
Related to this product
Solutions
Certificates and Approvals

PAROC® stands for energy-efficient and fire safe insulation products and solutions of stone wool for new and renovated buildings, HVAC, marine and offshore, acoustics and other industrial applications. Behind those products there is an 80-year history of stonewool production knowhow backed with technical insulation expertise and innovation. We manufacture our products in Finland, Sweden, Lithuania, Poland and Russia, and deliver them to customers in our familiar red-and-white-striped packages. For more information please visit our About Paroc webpages.

Paroc Group Oy

Energiakuja 3 P.O BOX 240
00181 Helsinki, Finland
Tel. +358 46 876 8000

Follow Us:

© Paroc Group 2020