PAROC Pro Lock WR 140

PAROC Pro Lock WR 140
PAROC Pro Lock WR 140 is a non-combustible stone wool pipe section for industrial pipe lines where the risk of CUI (corrosion under insulation) is present. 
PAROC Pro Lock is a unique solution, providing the benefits of a two-layer insulation with a single layer installation. PAROC Pro Lock has a Z-lock connection in all circumferential and longitudinal joints. The Z-lock is reducing thermal losses caused by thermal expansion. PAROC WR products are an excellent tool for minimizing the risk of CUI, keeping the superior water repellent properties at temperatures up to 300 °C. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.
 

Datasheet

 
Updated 11 Jun 2020

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)680-WS1-CL10
Nominal Density
140 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
80 - 160 mm219 - 914 mm1200/1000 mm
In accordance with EN 13467In accordance with EN 13467In accordance with EN 13467
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability680 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Cartons or plastic packs on pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1L EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 50 °C, λ500.041 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000.047 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000.063 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000.085 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 400 °C, λ4000.110 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8 for outer diameter < 150 mm, T9 for outer diameter ≥ 150 mm EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

PAROC WR pipe sections are providing very low water absorption. < 0,1 kg/m2 at temperatures up to 300°C according to EN 13472

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)680-WS1-CL10
Nominal Density
140 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
80 - 160 mm219 - 914 mm1200/1000 mm
In accordance with EN 13467In accordance with EN 13467In accordance with EN 13467
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability680 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Cartons or plastic packs on pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1L EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 50 °C, λ500.041 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000.047 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000.063 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000.085 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 400 °C, λ4000.110 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8 for outer diameter < 150 mm, T9 for outer diameter ≥ 150 mm EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

PAROC WR pipe sections are providing very low water absorption. < 0,1 kg/m2 at temperatures up to 300°C according to EN 13472

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)680-WS1-CL10
Nominal Density
140 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
80 - 160 mm219 - 914 mm1200/1000 mm
In accordance with EN 13467In accordance with EN 13467In accordance with EN 13467
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability680 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Cartons or plastic packs on pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1L EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 50 °C, λ500.041 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000.047 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000.063 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000.085 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 400 °C, λ4000.110 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8 for outer diameter < 150 mm, T9 for outer diameter ≥ 150 mm EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

PAROC WR pipe sections are providing very low water absorption. < 0,1 kg/m2 at temperatures up to 300°C according to EN 13472

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.